Manual Pages
Table of Contents
na_cifs_setup - configure CIFS service
cifs setup
The cifs setup command performs the initial configuration
of the filer for CIFS. You must have installed the CIFS
license before you enter this command. You must run the
cifs setup command from the console or from a telnet connection;
you can't enter the command through rsh.
-
/etc/cifsconfig_setup.cfg
- setup configuration information
-
/etc/cifsconfig_share.cfg
- share configuration information
-
/etc/cifssec.cfg
- NT domain machine account information
-
/etc/filersid.cfg
- local machine SID
/etc/lclgroups.cfg local NT group information
-
/etc/usermap.cfg
- multiprotocol user map file
The values for domain controllers and WINS servers need
not match on both storage systems in a cluster. However,
if you have a multiprotocol environment and use UID-to-SID
mapping, the UNIX security information must be compatible
between the two domains.
Any changes take effect immediately
Changes are persistent across system reboots.
na_cifs_access(1), na_partner(1), na_group(5),
na_passwd(5).
Table of Contents