Content-type: text/html Man page of usb_if_descr

usb_if_descr

Section: Data Structures for Drivers (9S)
Updated: 5 Jan 2004
Index Return to Main Contents
 

NAME

usb_if_descr - USB interface descriptor  

SYNOPSIS

#include <sys/usb/usba.h> 
 

INTERFACE LEVEL

Solaris DDI specific (Solaris DDI)  

DESCRIPTION

The usb_if_descr_t interface descriptor defines attributes of an interface. A configuration contains one or more interfaces. An interface contains one or more endpoints.

Please refer to Section 9.6.5 of the USB 2.0 specification. The USB 2.0 specification is available at www.usb.org.

One or more configuration descriptors are retrieved from a USB device during device enumeration. They can be accessed via usb_get_dev_data(9F).

A interface descriptor has the following fields:


uint8_t         bLength                 Size of this descriptor
                                        in bytes.

uint8_t         bDescriptorType         Set to USB_DESCR_TYPE_IF.

uint8_t         bInterfaceNumber        Interface number (0-based).

uint8_t         bAlternateSetting       Alternate setting number for
                                        this interface and its
                                        endpoints (0-based).

uint8_t         bNumEndpoints           Number of endpoints,
                                        excluding endpoint 0.

uint8_t         bInterfaceClass         Interface Class code
                                        (see below).

uint8_t         bInterfaceSubClass      Sub class code.  (See USB 2.0
                                        specification of applicable
                                        interface class for information.)

uint8_t         bInterfaceProtocol      Protocol code.  (See USB 2.0
                                        specification of applicable
                                        interface class for information.)

uint8_t         iInterface              Index of optional string
                                        describing this interface
                                        Valid if > 0. Pass to
                                        usb_get_string_descr(9F) to
                                        retrieve string.

USB 2.0 specification interface descriptor bInterfaceClass field
values are as follows:

        USB_CLASS_APP             Application-specific interface class

        USB_CLASS_AUDIO           Audio interface class

        USB_CLASS_CCID            Chip/Smartcard interface class

        USB_CLASS_CDC_CTRL        CDC control interface class

        USB_CLASS_CDC_DATA        CDC data interface class

        USB_CLASS_SECURITY        Content security interface class

        USB_CLASS_DIAG            Diagnostic interface class

        USB_CLASS_HID             HID interface class

        USB_CLASS_HUB             HUB interface class

        USB_CLASS_MASS_STORAGE    Mass storage interface class

        USB_CLASS_PHYSICAL        Physical interface class

        USB_CLASS_PRINTER         Printer interface class

        USB_CLASS_VENDOR_SPEC     Vendor-specific interface class

        USB_CLASS_WIRELESS        Wireless interface class

        

 

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPEATTRIBUTE VALUE
ArchitecturePCI-based systems
Interface stabilityEvolving
AvailabilitySUNWusbu

 

SEE ALSO

attributes(5), usb_get_alt_if(9F), usb_get_cfg(9F), usb_get_dev_data(9F), usb_get_string_descr(9F), usb_parse_data(9F), usb_cfg_descr(9S), usb_ctrl_request(9S), usb_dev_descr(9S), usb_dev_qlf_descr(9S), usb_ep_descr(9S), usb_other_speed_cfg_descr(9S), usb_string_descr(9S)


 

Index

NAME
SYNOPSIS
INTERFACE LEVEL
DESCRIPTION
ATTRIBUTES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 02:36:24 GMT, October 02, 2010