Content-type: text/html Man page of tran_bus_reset

tran_bus_reset

Section: Driver Entry Points (9E)
Updated: 17 Mar 1999
Index Return to Main Contents
 

NAME

tran_bus_reset - reset a SCSI bus  

SYNOPSIS

#include <sys/scsi/scsi.h> int prefix

tran_bus_reset(dev_info_t *hba_dip, int level);

 

INTERFACE LEVEL

Solaris DDI  

PARAMETERS

hba_dip

The dev_info_t pointer associated with the SCSI HBA.

level

The level of reset required.

 

DESCRIPTION

The tran_bus_reset() vector in the scsi_hba_tran(9S) structure should be initialized during the HBA driver's attach(9E). It is an HBA entry point to be called when a user initiates a bus reset through device control interfaces.

tran_bus_reset() must reset the SCSI bus without resetting targets.

level will be one of the following:

RESET_BUS

Reset the SCSI bus only, not the targets.

Implementation is hardware specific. If it is not possible to reset the SCSI bus without changing the state and operating mode of the targets, the HBA driver should not initialize this vector or return failure.  

RETURN VALUES

tran_bus_reset() should return:

1

on success.

0

on failure.

 

ATTRIBUTES

See attributes(5) for a description of the following attributes:

ATTRIBUTE TYPEATTRIBUTE VALUE

Interface StabilityCommitted

 

SEE ALSO

attributes(5), tran_quiesce(9E), scsi_hba_tran(9S)


 

Index

NAME
SYNOPSIS
INTERFACE LEVEL
PARAMETERS
DESCRIPTION
RETURN VALUES
ATTRIBUTES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 02:39:35 GMT, October 02, 2010