Content-type: text/html Man page of uumonitor

uumonitor

Section: Maintenance Commands (8)
Index Return to Main Contents
 

NAME

uumonitor - Monitors the UUCP system  

SYNOPSIS

/usr/lib/uucp/uumonitor  

DESCRIPTION

The uumonitor command displays a synopsis in tabular format of the current UUCP status. The format of each line in the table is as follows:

system_name #C #X most_recent_status CNT:# time

Table entries are defined as follows:

system_name
The remote system for which the entry applies.
#C
The number of C.files queued for the remote system.
#X
The number of requests for remote execution from the remote system.
most_recent_status
The result of the most recent attempt to connect to the remote system.
CNT:#
The number of times that a failure to log in to the remote system has occurred. This does not include the number failed dial attempts.
time
The time of the last status entry was made for this system.

The uumonitor command is helpful for detecting systems that have backlogs, that have gone away for awhile, that have changed phone numbers, and so forth. The CNT: field is useful for detecting a system whose login/passwd has changed. If the CNT: field gets larger than the maximum allowable failures (currently 20), no further attempts to connect to this system are made. If the number of C.files queued starts getting unusually large (depending on the system anywhere from 100-1000), action should be taken to determine the cause of the backlog.  

RELATED INFORMATION

Commands: uucp(1) delim off


 

Index

NAME
SYNOPSIS
DESCRIPTION
RELATED INFORMATION

This document was created by man2html, using the manual pages.
Time: 02:40:33 GMT, October 02, 2010