Content-type: text/html Man page of ruptime

ruptime

Section: User Commands (1)
Index Return to Main Contents
 

NAME

ruptime - Displays the status of each host on a network  

SYNOPSIS

ruptime [-ar] [-l|-t|-u]

ruptime [-ar] [-l|-t|-u] [machinename]

The ruptime command displays the status of each host on a local network that is running the rwhod daemon.

If machinename is specified, only the status of that machine is displayed.
 

OPTIONS

Includes all users. Without this option, users whose sessions are idle an hour or more are not included. Sorts the list by the load average over 5-, 10-, and 15-minute intervals prior to a server's transmission. The load averages are multiplied by 10 to represent the value in decimal format. Reverses the sort order. Sorts the list by the length of uptime. Sorts the list by the number of users.
 

DESCRIPTION

The status lines are sorted by hostname unless the -l, -t, or -u option is indicated. The status information is provided in packets broadcast once every 3 minutes by each network host running rwhod. Any activity (such as the power to a host being turned on or off) that takes place between broadcasts is not reflected until the next broadcast. Hosts for which no status information is received for 11 minutes are reported as down.
 

EXAMPLES

To get a status report on the hosts on the local network, enter: $ ruptime

Information similar to the following is displayed: host1  up      5:15,           4 users, load 0.09, 0.04, 0.04
host2   up      7:45,           3 users, load 0.08, 0.07, 0.04
host3   up      2:28,           0 users, load 0.01, 0.02, 0.03
host4   up      3+01:44,        1 user, load 0.01, 0.02, 0.03
host7   up      7:43,           1 user, load 0.06, 0.12, 0.11
(Output may be formatted differently on your system.) To get a status report sorted by load average, enter: $ ruptime -l
Information similar to the following is displayed: host2  up      7:45,           3 users, load 0.08, 0.07, 0.04
host1   up      5:18,           4 users, load 0.07, 0.07, 0.04
host7   up      7:43,           1 user, load 0.06, 0.12, 0.11
host3   up      2:28,           0 users, load 0.01, 0.02, 0.03
host4   up      3+01:44,        1 user, load 0.01, 0.02, 0.03
(Output may be formatted differently on your system.)
 

FILES

Indicates data files received from remote rwhod daemons.
 

SEE ALSO

Commands:  rwho(1), rwhod(8)


 

Index

NAME
SYNOPSIS
OPTIONS
DESCRIPTION
EXAMPLES
FILES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 02:42:49 GMT, October 02, 2010