performs a variety of operations on APT's package cache.
does not manipulate the state of the system but does provide operations to search and generate interesting output from the package metadata.
option is given, one of the commands below must be present.
adds the named package index files to the package cache. This is for debugging only.
performs the same operation as
apt-get check. It builds the source and package caches from the sources in
displays information about the packages listed on the command line. Remaining arguments are package names. The available versions and reverse dependencies of each package listed are listed, as well as forward dependencies for each version. Forward (normal) dependencies are those packages upon which the package in question depends; reverse dependencies are those packages that depend upon the package in question. Thus, forward dependencies must be satisfied for a package, but reverse dependencies need not be. For instance,
apt-cache showpkg libreadline2
would produce output similar to the following:
Thus it may be seen that libreadline2, version 2.1-12, depends on libc5 and ncurses3.0 which must be installed for libreadline2 to work. In turn, libreadlineg2 and libreadline2-altdev depend on libreadline2. If libreadline2 is installed, libc5 and ncurses3.0 (and ldso) must also be installed; libreadlineg2 and libreadline2-altdev do not have to be installed. For the specific meaning of the remainder of the output it is best to consult the apt source code.
2.1-12 - libc5 (2 5.4.0-0) ncurses3.0 (0 (null))
displays some statistics about the cache. No further arguments are expected. Statistics reported are:
Total package names
is the number of package names found in the cache.
is the number of regular, ordinary package names; these are packages that bear a one-to-one correspondence between their names and the names used by other packages for them in dependencies. The majority of packages fall into this category.
Pure virtual packages
is the number of packages that exist only as a virtual package name; that is, packages only "provide" the virtual package name, and no package actually uses the name. For instance, "mail-transport-agent" in the Debian GNU/Linux system is a pure virtual package; several packages provide "mail-transport-agent", but there is no package named "mail-transport-agent".
Single virtual packages
is the number of packages with only one package providing a particular virtual package. For example, in the Debian GNU/Linux system, "X11-text-viewer" is a virtual package, but only one package, xless, provides "X11-text-viewer".
Mixed virtual packages
is the number of packages that either provide a particular virtual package or have the virtual package name as the package name. For instance, in the Debian GNU/Linux system, "debconf" is both an actual package, and provided by the debconf-tiny package.
is the number of package names that were referenced in a dependency but were not provided by any package. Missing packages may be in evidence if a full distribution is not accessed, or if a package (real or virtual) has been dropped from the distribution. Usually they are referenced from Conflicts or Breaks statements.
versions is the number of package versions found in the cache; this value is therefore at least equal to the number of total package names. If more than one distribution (both "stable" and "unstable", for instance), is being accessed, this value can be considerably larger than the number of total package names.
is the number of dependency relationships claimed by all of the packages in the cache.
displays all the source package records that match the given package names. All versions are shown, as well as all records that declare the name to be a Binary.
shows a short listing of every package in the cache. It is primarily for debugging.
prints out an available list to stdout. This is suitable for use with
and is used by the
displays a summary of all unmet dependencies in the package cache.
performs a function similar to
dpkg --print-avail; it displays the package records for the named packages.
search regex [ regex ... ]
performs a full text search on all available package lists for the POSIX regex pattern given, see
regex(7). It searches the package names and the descriptions for an occurrence of the regular expression and prints out the package name and the short description, including virtual package names. If
is given then output identical to
is produced for each matched package, and if
is given then the long description is not searched, only the package name is.
Separate arguments can be used to specify multiple search patterns that are and'ed together.
shows a listing of each dependency a package has and all the possible other packages that can fulfill that dependency.
shows a listing of each reverse dependency a package has.
pkgnames [ prefix ]
This command prints the name of each package in the system. The optional argument is a prefix match to filter the name list. The output is suitable for use in a shell tab complete function and the output is generated extremely quickly. This command is best used with the
takes a list of packages on the command line and generates output suitable for use by dotty from the
package. The result will be a set of nodes and edges representing the relationships between the packages. By default the given packages will trace out all dependent packages; this can produce a very large graph. To limit the output to only the packages listed on the command line, set the
The resulting nodes will have several shapes; normal packages are boxes, pure provides are triangles, mixed provides are diamonds, missing packages are hexagons. Orange boxes mean recursion was stopped [leaf packages], blue lines are pre-depends, green lines are conflicts.
Caution, dotty cannot graph larger sets of packages.
The same as
dotty, only for xvcg from the
policy [ pkg(s) ]
is meant to help debug issues relating to the preferences file. With no arguments it will print out the priorities of each source. Otherwise it prints out detailed information about the priority selection of the named package.
madison /[ pkg(s) ]
command attempts to mimic the output format and a subset of the functionality of the Debian archive management tool,
madison. It displays available versions of a package in a tabular format. Unlike the original
madison, it can only display information for the architecture for which APT has retrieved package lists (APT::Architecture).
All command line options may be set using the configuration file, the descriptions indicate the configuration option to set. For boolean options you can override the config file by using something like
or several other variations.
Select the file to store the package cache. The package cache is the primary cache used by all operations. Configuration Item:
Select the file to store the source cache. The source is used only by
and it stores a parsed version of the package information from remote sources. When building the package cache the source cache is used to avoid reparsing all of the package files. Configuration Item:
Quiet; produces output suitable for logging, omitting progress indicators. More q's will produce more quietness up to a maximum of 2. You can also use
to set the quietness level, overriding the configuration file. Configuration Item:
Print only important dependencies; for use with unmet and depends. Causes only Depends and Pre-Depends relations to be printed. Configuration Item:
Print full package records when searching. Configuration Item:
Print full records for all available versions. This is the default; to turn it off, use
is specified, only the candidate version will displayed (the one which would be selected for installation). This option is only applicable to the
command. Configuration Item:
Perform automatic package cache regeneration, rather than use the cache as it is. This is the default; to turn it off, use
--no-generate. Configuration Item:
Only search on the package names, not the long descriptions. Configuration Item:
print all names, including virtual packages and missing dependencies. Configuration Item:
recursive so that all packages mentioned are printed once. Configuration Item:
Limit the output of
to packages which are currently installed. Configuration Item:
Show a short usage summary.
Show the program version.
Configuration File; Specify a configuration file to use. The program will read the default configuration file and then this configuration file. See
for syntax information.
Set a Configuration Option; This will set an arbitrary configuration option. The syntax is
can be used multiple times to set different options.
Locations to fetch packages from. Configuration Item:
Storage area for state information for each package resource specified in
Storage area for state information in transit. Configuration Item:
returns zero on normal operation, decimal 100 on error.
m[blue]APT bug pagem. If you wish to report a bug in APT, please see
APT bug page
- SEE ALSO
This document was created by
using the manual pages.
Time: 04:17:50 GMT, September 24, 2010