Man page of libcurl-errors
Section: libcurl errors (3)
Updated: 8 Jun 2008
Return to Main Contents
libcurl-errors - error codes in libcurl
This man page includes most, if not all, available error codes in libcurl.
Why they occur and possibly what you can do to fix the problem are also included.
Almost all "easy" interface functions return a CURLcode error code. No matter
what, using the curl_easy_setopt(3) option CURLOPT_ERRORBUFFER is
a good idea as it will give you a human readable error string that may offer
more details about the cause of the error than just the error code.
curl_easy_strerror(3) can be called to get an error string from a
given CURLcode number.
CURLcode is one of the following:
- CURLE_OK (0)
All fine. Proceed as usual.
- CURLE_UNSUPPORTED_PROTOCOL (1)
The URL you passed to libcurl used a protocol that this libcurl does not
support. The support might be a compile-time option that you didn't use, it
can be a misspelled protocol string or just a protocol libcurl has no code
- CURLE_FAILED_INIT (2)
Very early initialization code failed. This is likely to be an internal error
- CURLE_URL_MALFORMAT (3)
The URL was not properly formatted.
- CURLE_COULDNT_RESOLVE_PROXY (5)
Couldn't resolve proxy. The given proxy host could not be resolved.
- CURLE_COULDNT_RESOLVE_HOST (6)
Couldn't resolve host. The given remote host was not resolved.
- CURLE_COULDNT_CONNECT (7)
Failed to connect() to host or proxy.
- CURLE_FTP_WEIRD_SERVER_REPLY (8)
After connecting to a FTP server, libcurl expects to get a certain reply
back. This error code implies that it got a strange or bad reply. The given
remote server is probably not an OK FTP server.
- CURLE_REMOTE_ACCESS_DENIED (9)
We were denied access to the resource given in the URL. For FTP, this occurs
while trying to change to the remote directory.
- CURLE_FTP_WEIRD_PASS_REPLY (11)
After having sent the FTP password to the server, libcurl expects a proper
reply. This error code indicates that an unexpected code was returned.
- CURLE_FTP_WEIRD_PASV_REPLY (13)
libcurl failed to get a sensible result back from the server as a response to
either a PASV or a EPSV command. The server is flawed.
- CURLE_FTP_WEIRD_227_FORMAT (14)
FTP servers return a 227-line as a response to a PASV command. If libcurl
fails to parse that line, this return code is passed back.
- CURLE_FTP_CANT_GET_HOST (15)
An internal failure to lookup the host used for the new connection.
- CURLE_FTP_COULDNT_SET_TYPE (17)
Received an error when trying to set the transfer mode to binary or ASCII.
- CURLE_PARTIAL_FILE (18)
A file transfer was shorter or larger than expected. This happens when the
server first reports an expected transfer size, and then delivers data that
doesn't match the previously given size.
- CURLE_FTP_COULDNT_RETR_FILE (19)
This was either a weird reply to a 'RETR' command or a zero byte transfer
- CURLE_QUOTE_ERROR (21)
When sending custom "QUOTE" commands to the remote server, one of the commands
returned an error code that was 400 or higher (for FTP) or otherwise
indicated unsuccessful completion of the command.
- CURLE_HTTP_RETURNED_ERROR (22)
This is returned if CURLOPT_FAILONERROR is set TRUE and the HTTP server
returns an error code that is >= 400. (This error code was formerly known as
- CURLE_WRITE_ERROR (23)
An error occurred when writing received data to a local file, or an error was
returned to libcurl from a write callback.
- CURLE_UPLOAD_FAILED (25)
Failed starting the upload. For FTP, the server typically denied the STOR
command. The error buffer usually contains the server's explanation for this.
(This error code was formerly known as CURLE_FTP_COULDNT_STOR_FILE.)
- CURLE_READ_ERROR (26)
There was a problem reading a local file or an error returned by the read
- CURLE_OUT_OF_MEMORY (27)
A memory allocation request failed. This is serious badness and
things are severely screwed up if this ever occurs.
- CURLE_OPERATION_TIMEDOUT (28)
Operation timeout. The specified time-out period was reached according to the
- CURLE_FTP_PORT_FAILED (30)
The FTP PORT command returned error. This mostly happens when you haven't
specified a good enough address for libcurl to use. See CURLOPT_FTPPORT.
- CURLE_FTP_COULDNT_USE_REST (31)
The FTP REST command returned error. This should never happen if the server is
- CURLE_RANGE_ERROR (33)
The server does not support or accept range requests.
- CURLE_HTTP_POST_ERROR (34)
This is an odd error that mainly occurs due to internal confusion.
- CURLE_SSL_CONNECT_ERROR (35)
A problem occurred somewhere in the SSL/TLS handshake. You really want the
error buffer and read the message there as it pinpoints the problem slightly
more. Could be certificates (file formats, paths, permissions), passwords, and
- CURLE_FTP_BAD_DOWNLOAD_RESUME (36)
Attempting FTP resume beyond file size.
- CURLE_FILE_COULDNT_READ_FILE (37)
A file given with FILE:// couldn't be opened. Most likely because the file
path doesn't identify an existing file. Did you check file permissions?
- CURLE_LDAP_CANNOT_BIND (38)
LDAP cannot bind. LDAP bind operation failed.
- CURLE_LDAP_SEARCH_FAILED (39)
LDAP search failed.
- CURLE_FUNCTION_NOT_FOUND (41)
Function not found. A required zlib function was not found.
- CURLE_ABORTED_BY_CALLBACK (42)
Aborted by callback. A callback returned "abort" to libcurl.
- CURLE_BAD_FUNCTION_ARGUMENT (43)
Internal error. A function was called with a bad parameter.
- CURLE_INTERFACE_FAILED (45)
Interface error. A specified outgoing interface could not be used. Set which
interface to use for outgoing connections' source IP address with
CURLOPT_INTERFACE. (This error code was formerly known as
- CURLE_TOO_MANY_REDIRECTS (47)
Too many redirects. When following redirects, libcurl hit the maximum amount.
Set your limit with CURLOPT_MAXREDIRS.
- CURLE_UNKNOWN_TELNET_OPTION (48)
An option set with CURLOPT_TELNETOPTIONS was not recognized/known. Refer to
the appropriate documentation.
- CURLE_TELNET_OPTION_SYNTAX (49)
A telnet option string was Illegally formatted.
- CURLE_PEER_FAILED_VERIFICATION (51)
The remote server's SSL certificate or SSH md5 fingerprint was deemed not OK.
- CURLE_GOT_NOTHING (52)
Nothing was returned from the server, and under the circumstances, getting
nothing is considered an error.
- CURLE_SSL_ENGINE_NOTFOUND (53)
The specified crypto engine wasn't found.
- CURLE_SSL_ENGINE_SETFAILED (54)
Failed setting the selected SSL crypto engine as default!
- CURLE_SEND_ERROR (55)
Failed sending network data.
- CURLE_RECV_ERROR (56)
Failure with receiving network data.
- CURLE_SSL_CERTPROBLEM (58)
problem with the local client certificate.
- CURLE_SSL_CIPHER (59)
Couldn't use specified cipher.
- CURLE_SSL_CACERT (60)
Peer certificate cannot be authenticated with known CA certificates.
- CURLE_BAD_CONTENT_ENCODING (61)
Unrecognized transfer encoding.
- CURLE_LDAP_INVALID_URL (62)
Invalid LDAP URL.
- CURLE_FILESIZE_EXCEEDED (63)
Maximum file size exceeded.
- CURLE_USE_SSL_FAILED (64)
Requested FTP SSL level failed.
- CURLE_SEND_FAIL_REWIND (65)
When doing a send operation curl had to rewind the data to retransmit, but the
rewinding operation failed.
- CURLE_SSL_ENGINE_INITFAILED (66)
Initiating the SSL Engine failed.
- CURLE_LOGIN_DENIED (67)
The remote server denied curl to login (Added in 7.13.1)
- CURLE_TFTP_NOTFOUND (68)
File not found on TFTP server.
- CURLE_TFTP_PERM (69)
Permission problem on TFTP server.
- CURLE_REMOTE_DISK_FULL (70)
Out of disk space on the server.
- CURLE_TFTP_ILLEGAL (71)
Illegal TFTP operation.
- CURLE_TFTP_UNKNOWNID (72)
Unknown TFTP transfer ID.
- CURLE_REMOTE_FILE_EXISTS (73)
File already exists and will not be overwritten.
- CURLE_TFTP_NOSUCHUSER (74)
This error should never be returned by a properly functioning TFTP server.
- CURLE_CONV_FAILED (75)
Character conversion failed.
- CURLE_CONV_REQD (76)
Caller must register conversion callbacks.
- CURLE_SSL_CACERT_BADFILE (77)
Problem with reading the SSL CA cert (path? access rights?)
- CURLE_REMOTE_FILE_NOT_FOUND (78)
The resource referenced in the URL does not exist.
- CURLE_SSH (79)
An unspecified error occurred during the SSH session.
- CURLE_SSL_SHUTDOWN_FAILED (80)
Failed to shut down the SSL connection.
- CURLE_AGAIN (81)
Socket is not ready for send/recv wait till it's ready and try again. This
return code is only returned from curl_easy_recv(3) and
curl_easy_send(3) (Added in 7.18.2)
- CURLE_SSL_CRL_BADFILE (82)
Failed to load CRL file (Added in 7.19.0)
- CURLE_SSL_ISSUER_ERROR (83)
Issuer check failed (Added in 7.19.0)
These error codes will never be returned. They were used in an old libcurl
version and are currently unused.
This is the generic return code used by functions in the libcurl multi
interface. Also consider curl_multi_strerror(3).
- CURLM_CALL_MULTI_PERFORM (-1)
This is not really an error. It means you should call
curl_multi_perform(3) again without doing select() or similar in between.
- CURLM_OK (0)
Things are fine.
- CURLM_BAD_HANDLE (1)
The passed-in handle is not a valid CURLM handle.
- CURLM_BAD_EASY_HANDLE (2)
An easy handle was not good/valid. It could mean that it isn't an easy handle
at all, or possibly that the handle already is in used by this or another
- CURLM_OUT_OF_MEMORY (3)
You are doomed.
- CURLM_INTERNAL_ERROR (4)
This can only be returned if libcurl bugs. Please report it to us!
- CURLM_BAD_SOCKET (5)
The passed-in socket is not a valid one that libcurl already knows about.
(Added in 7.15.4)
- CURLM_UNKNOWN_OPTION (6)
curl_multi_setopt() with unsupported option
(Added in 7.15.4)
The "share" interface will return a CURLSHcode to indicate when an error has
occurred. Also consider curl_share_strerror(3).
- CURLSHE_OK (0)
All fine. Proceed as usual.
- CURLSHE_BAD_OPTION (1)
An invalid option was passed to the function.
- CURLSHE_IN_USE (2)
The share object is currently in use.
- CURLSHE_INVALID (3)
An invalid share object was passed to the function.
- CURLSHE_NOMEM (4)
Not enough memory was available.
(Added in 7.12.0)
This document was created by
using the manual pages.
Time: 04:14:16 GMT, September 24, 2010