Content-type: text/html Man page of SSH-VULNKEY

SSH-VULNKEY

Section: User Commands (1)
Index Return to Main Contents

BSD mandoc
 

NAME

ssh-vulnkey - check blacklist of compromised keys  

SYNOPSIS

[-q | -v ] file ...
-a  

DESCRIPTION

checks a key against a blacklist of compromised keys.

A substantial number of keys are known to have been generated using a broken version of OpenSSL distributed by Debian which failed to seed its random number generator correctly. Keys generated using these OpenSSL versions should be assumed to be compromised. This tool may be useful in checking for such keys.

Keys that are compromised cannot be repaired; replacements must be generated using ssh-keygen1. Make sure to update authorized_keys files on all systems where compromised keys were permitted to authenticate.

The argument list will be interpreted as a list of paths to public key files or authorized_keys files. If no suitable file is found at a given path, will append .pub and retry, in case it was given a private key file. If no files are given as arguments, will check ~/.ssh/id_rsa ~/.ssh/id_dsa ~/.ssh/identity ~/.ssh/authorized_keys and ~/.ssh/authorized_keys2 as well as the system's host keys if readable.

If ``-'' is given as an argument, will read from standard input. This can be used to process output from ssh-keyscan1, for example:

$ ssh-keyscan -t rsa remote.example.org | ssh-vulnkey

Unless the PermitBlacklistedKeys option is used, sshd(8) will reject attempts to authenticate with keys in the compromised list.

The output from looks like this:

/etc/ssh/ssh_host_key:1: COMPROMISED: RSA1 2048 xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx [email protected]
/home/user/.ssh/id_dsa:1: Not blacklisted: DSA 1024 xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx /home/user/.ssh/id_dsa.pub
/home/user/.ssh/authorized_keys:3: Unknown (blacklist file not installed): RSA 1024 xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx [email protected]

Each line is of the following format (any lines beginning with ``#'' should be ignored by scripts):

filename : line : status : type size fingerprint comment

It is important to distinguish between the possible values of status

COMPROMISED
These keys are listed in a blacklist file, normally because their corresponding private keys are well-known. Replacements must be generated using ssh-keygen1.
Not blacklisted
A blacklist file exists for this key type and size, but this key is not listed in it. Unless there is some particular reason to believe otherwise, this key may be used safely. (Note that DSA keys used with the broken version of OpenSSL distributed by Debian may be compromised in the event that anyone captured a network trace, even if they were generated with a secure version of OpenSSL.)
Unknown (blacklist file not installed)
No blacklist file exists for this key type and size. You should find a suitable published blacklist and install it before deciding whether this key is safe to use.

The options are as follows:

-a
Check keys of all users on the system. You will typically need to run as root to use this option. For each user, will check ~/.ssh/id_rsa ~/.ssh/id_dsa ~/.ssh/identity ~/.ssh/authorized_keys and ~/.ssh/authorized_keys2 It will also check the system's host keys.
-q
Quiet mode. Normally, outputs the fingerprint of each key scanned, with a description of its status. This option suppresses that output.
-v
Verbose mode. Normally, does not output anything for keys that are not listed in their corresponding blacklist file (although it still produces output for keys for which there is no blacklist file, since their status is unknown). This option causes to produce output for all keys.

 

EXIT STATUS

will exit zero if any of the given keys were in the compromised list, otherwise non-zero.  

BLACKLIST FILE FORMAT

The blacklist file may start with comments, on lines starting with ``#'' After these initial comments, it must follow a strict format:

The key fingerprint may be generated using ssh-keygen1:

$ ssh-keygen -l -f /path/to/key

This strict format is necessary to allow the blacklist file to be checked quickly, using a binary-search algorithm.  

FILES

~/.ssh/id_rsa
If present, contains the protocol version 2 RSA authentication identity of the user.
~/.ssh/id_dsa
If present, contains the protocol version 2 DSA authentication identity of the user.
~/.ssh/identity
If present, contains the protocol version 1 RSA authentication identity of the user.
~/.ssh/authorized_keys
If present, lists the public keys (RSA/DSA) that can be used for logging in as this user.
~/.ssh/authorized_keys2
Obsolete name for ~/.ssh/authorized_keys This file may still be present on some old systems, but should not be created if it is missing.
/etc/ssh/ssh_host_rsa_key
If present, contains the protocol version 2 RSA identity of the system.
/etc/ssh/ssh_host_dsa_key
If present, contains the protocol version 2 DSA identity of the system.
/etc/ssh/ssh_host_key
If present, contains the protocol version 1 RSA identity of the system.
/usr/share/ssh/blacklist. TYPE - LENGTH
If present, lists the blacklisted keys of type TYPE ( ``RSA'' or ``DSA'' and bit length LENGTH The format of this file is described above. RSA1 keys are converted to RSA before being checked in the blacklist. Note that the fingerprints of RSA1 keys are computed differently, so you will not be able to find them in the blacklist by hand.
/etc/ssh/blacklist. TYPE - LENGTH
Same as /usr/share/ssh/blacklist. TYPE - LENGTH but may be edited by the system administrator to add new blacklist entries.

 

SEE ALSO

ssh-keygen1, sshd(8)  

AUTHORS

An -nosplit An Colin Watson Aq [email protected]

Florian Weimer suggested the option to check keys of all users, and the idea of processing ssh-keyscan1 output.


 

Index

NAME
SYNOPSIS
DESCRIPTION
EXIT STATUS
BLACKLIST FILE FORMAT
FILES
SEE ALSO
AUTHORS

This document was created by man2html, using the manual pages.
Time: 03:41:18 GMT, September 24, 2010