Content-type: text/html Man page of ddi_mem_alloc

ddi_mem_alloc

Section: Kernel Functions for Drivers (9F)
Updated: 04 Apr 2006
Index Return to Main Contents
 

NAME

ddi_mem_alloc, ddi_mem_free - allocate and free sequentially accessed memory  

SYNOPSIS

#include <sys/ddi.h> 
#include <sys/sunddi.h>

int ddi_mem_alloc(dev_info_t *dip, ddi_dma_lim_t *limits, uint_t length, uint_t flags, caddr_t *kaddrp, uint_t *real_length);

void ddi_mem_free(caddr_t kaddr);  

INTERFACE LEVEL

These interfaces are obsolete. ddi_dma_mem_alloc(9F) and ddi_dma_mem_free(9F) should be used instead.  

PARAMETERS

 

ddi_mem_alloc()

dip A pointer to the device's dev_info structure.

limits A pointer to a DMA limits structure for this device (see ddi_dma_lim_sparc(9S) or ddi_dma_lim_x86(9S)). If this pointer is NULL, a default set of DMA limits is assumed.

length The length in bytes of the desired allocation.

flags The possible flags 1 and 0 are taken to mean, respectively, wait until memory is available, or do not wait.

kaddrp On a successful return, *kaddrp points to the allocated memory.

real_length The length in bytes that was allocated. Alignment and padding requirements may cause ddi_mem_alloc() to allocate more memory than requested in length.

 

ddi_mem_free()

kaddr The memory returned from a successful call to ddi_mem_alloc().

 

DESCRIPTION

The ddi_mem_alloc() function allocates memory for DMA transfers and should be used if the device is performing sequential, unidirectional, block-sized and block-aligned transfers to or from memory. This type of access is commonly known as streaming access. The allocation will obey the alignment and padding constraints as specified by the limits argument and other limits imposed by the system.

Note that you must still use DMA resource allocation functions (see ddi_dma_setup(9F)) to establish DMA resources for the memory allocated using ddi_mem_alloc(). ddi_mem_alloc() returns the actual size of the allocated memory object. Because of padding and alignment requirements, the actual size might be larger than the requested size. ddi_dma_setup(9F) requires the actual length.

In order to make the view of a memory object shared between a CPU and a DMA device consistent, explicit synchronization steps using ddi_dma_sync(9F) or ddi_dma_free(9F) are required.

The ddi_mem_free() function frees up memory allocated by ddi_mem_alloc().  

RETURN VALUES

The ddi_mem_alloc() function returns:

DDI_SUCCESS Memory successfully allocated.

DDI_FAILURE Allocation failed.

 

CONTEXT

The ddi_mem_alloc() function can be called from user, interrupt, or kernel context, except when flags is set to 1, in which case it cannot be called from interrupt context.  

ATTRIBUTES

See attributes(5) for a description of the following attributes:

ATTRIBUTE TYPEATTRIBUTE VALUE
Stability LevelObsolete

 

SEE ALSO

attributes(5), ddi_dma_free(9F), ddi_dma_mem_alloc(9F), ddi_dma_mem_free(9F), ddi_dma_setup(9F), ddi_dma_sync(9F), ddi_iopb_alloc(9F), ddi_dma_lim_sparc(9S), ddi_dma_lim_x86(9S), ddi_dma_req(9S)

Writing Device Drivers


 

Index

NAME
SYNOPSIS
INTERFACE LEVEL
PARAMETERS
ddi_mem_alloc()
ddi_mem_free()
DESCRIPTION
RETURN VALUES
CONTEXT
ATTRIBUTES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 02:39:45 GMT, October 02, 2010