Content-type: text/html Man page of ddi_io_rep_put8

ddi_io_rep_put8

Section: Kernel Functions for Drivers (9F)
Updated: 30 Sep 1996
Index Return to Main Contents
 

NAME

ddi_io_rep_put8, ddi_io_rep_put16, ddi_io_rep_put32, ddi_io_rep_putw, ddi_io_rep_putl, ddi_io_rep_putb - write multiple data to the mapped device register in I/O space  

SYNOPSIS

#include <sys/ddi.h> 
#include <sys/sunddi.h>

void ddi_io_rep_put8(ddi_acc_handle_t handle, uint8_t *host_addr, uin8_t *dev_addr, size_t repcount);

void ddi_io_rep_put16(ddi_acc_handle_t handle, uint16_t *host_addr, uin16_t *dev_addr, size_t repcount);

void ddi_io_rep_put32(ddi_acc_handle_t handle, uint32_t *host_addr, uin32_t *dev_addr, size_t repcount);  

INTERFACE LEVEL

Solaris DDI specific (Solaris DDI).  

PARAMETERS

handle Data access handle returned from setup calls, such as ddi_regs_map_setup(9F).

host_addr Base host address.

dev_addr Base device address.

repcount Number of data accesses to perform.

 

DESCRIPTION

These routines generate multiple writes to the device address, dev_address, in I/O space. repcount data is copied from the host address, host_addr, to the device address, dev_addr. For each input datum, the ddi_io_rep_put8(), ddi_io_rep_put16(), and ddi_io_rep_put32() functions write 8 bits, 16 bits, and 32 bits of data, respectively, to the device address. host_addr must be aligned to the datum boundary described by the function.

Each individual datum will automatically be translated to maintain a consistent view between the host and the device based on the encoded information in the data access handle. The translation may involve byte-swapping if the host and the device have incompatible endian characteristics.  

CONTEXT

These functions can be called from user, kernel, or interrupt context.  

SEE ALSO

isa(4), ddi_io_get8(9F), ddi_io_put8(9F), ddi_io_rep_get8(9F), ddi_regs_map_setup(9F), ddi_device_acc_attr(9S)  

NOTES

For drivers using these functions, it may not be easy to maintain a single source to support devices with multiple bus versions. For example, devices may offer I/O space in ISA bus (see isa(4)) but memory space only in PCI local bus. This is especially true in instruction set architectures such as x86 where accesses to the memory and I/O space are different.

The functions described in this manual page previously used symbolic names which specified their data access size; the function names have been changed so they now specify a fixed-width data size. See the following table for the new name equivalents:

Previous NameNew Name
ddi_io_rep_putbddi_io_rep_put8
ddi_io_rep_putwddi_io_rep_put16
ddi_io_rep_putlddi_io_rep_put32


 

Index

NAME
SYNOPSIS
INTERFACE LEVEL
PARAMETERS
DESCRIPTION
CONTEXT
SEE ALSO
NOTES

This document was created by man2html, using the manual pages.
Time: 02:39:38 GMT, October 02, 2010