Content-type: text/html Man page of ddi_intr_get_supported_types

ddi_intr_get_supported_types

Section: Kernel Functions for Drivers (9F)
Updated: 07 Apr 2005
Index Return to Main Contents
 

NAME

ddi_intr_get_supported_types - return information on supported hardware interrupt types  

SYNOPSIS

#include <sys/types.h>
#include <sys/conf.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>

int ddi_intr_get_supported_types(dev_info_t *dip, int *typesp);  

INTERFACE LEVEL

Solaris DDI specific (Solaris DDI)  

PARAMETERS

dip Pointer to dev_info structure

typesp Pointer to supported interrupt types

 

DESCRIPTION

The ddi_intr_get_supported_types() function retrieves the interrupt types supported by a particular hardware device and by the system software. Upon successful return, the supported types are returned as a bit mask in the integer pointed to by the typesp argument. See <sys/ddi_intr.h> for a list of interrupts that can be returned by a hardware device.

For PCI devices that support MSI and/or MSI-X based hardware, this interface returns only the interrupt types that are supported by all the hardware in the path to the hardware device.

An interrupt type is usable by the hardware device if it is returned by the ddi_intr_get_supported_types() function. The device driver can be programmed to use one of the returned interrupt types to receive hardware interrupts.  

RETURN VALUES

The ddi_intr_get_supported_types() function returns:

DDI_SUCCESS On success.

DDI_EINVAL On encountering invalid input parameters.

DDI_INTR_NOTFOUND Returned when the hardware device is found not to support any hardware interrupts.

 

CONTEXT

The ddi_intr_get_supported_types() function can be called from user or kernel non-interrupt context.  

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPEATTRIBUTE VALUE
Interface StabilityEvolving

 

SEE ALSO

pci(4), attributes(5), pcmcia(7D), sysbus(4), ddi_intr_add_handler(9F), ddi_intr_alloc(9F), ddi_intr_enable(9F)

Writing Device Drivers  

NOTES

The ddi_intr_get_supported_types() function can be called by the device driver even at any time if the driver has added an interrupt handler for a given interrupt type.

Soft interrupts are always usable and are not returned by this interface.

Any consumer of this interface should verify that the return value is not equal to DDI_SUCCESS. Incomplete checking for failure codes could result in inconsistent behavior among platforms.


 

Index

NAME
SYNOPSIS
INTERFACE LEVEL
PARAMETERS
DESCRIPTION
RETURN VALUES
CONTEXT
ATTRIBUTES
SEE ALSO
NOTES

This document was created by man2html, using the manual pages.
Time: 02:39:44 GMT, October 02, 2010