Content-type: text/html Man page of ddi_intr_add_handler

ddi_intr_add_handler

Section: Kernel Functions for Drivers (9F)
Updated: 22 Apr 2005
Index Return to Main Contents
 

NAME

ddi_intr_add_handler, ddi_intr_remove_handler - add or remove interrupt handler  

SYNOPSIS

#include <sys/types.h>
#include <sys/conf.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>

int ddi_intr_add_handler(ddi_intr_handle_t *h, ddi_intr_handler_t inthandler, void *arg1, void *arg2);

int ddi_intr_remove_handler(ddi_intr_handle_t h);  

INTERFACE LEVEL

Solaris DDI specific (Solaris DDI).  

PARAMETERS

ddi_intr_add_handler()

h Pointer to the DDI interrupt handle

inthandler Pointer to interrupt handler

arg1 First argument for the interrupt handler

arg2 Second, optional, argument for the interrupt handler

ddi_intr_remove_handler()

h DDI interrupt handle

 

DESCRIPTION

The ddi_intr_add_handler() function adds an interrupt handler given by the inthandler argument to the system with the handler arguments arg1 and arg2 for the previously allocated interrupt handle specified by the h pointer. The arguments arg1 and arg2 are passed as the first and second arguments, respectively, to the interrupt handler inthandler. See <sys/ddi_intr.h> for the definition of the interrupt handler.

The routine inthandler with the arguments arg1 and arg2 is called upon receipt of the appropriate interrupt. The interrupt handler should return DDI_INTR_CLAIMED if the interrupt is claimed and DDI_INTR_UNCLAIMED otherwise.

The ddi_intr_add_handler() function must be called after ddi_intr_alloc(), but before ddi_intr_enable() is called. The interrupt must be enabled through ddi_intr_enable() or ddi_intr_block_enable() before it can be used.

The ddi_intr_remove_handler() function removes the handler association, added previously with ddi_intr_add_handler(), for the interrupt identified by the interrupt handle h argument. Unloadable drivers should call this routine during their detach(9E) routine to remove the interrupt handler from the system.

The ddi_intr_remove_handler() function is used to disassociate the handler after the interrupt is disabled to remove dup-ed interrupt handles. See ddi_intr_dup_handler(9F) for dup-ed interrupt handles. If a handler is duplicated with the ddi_intr_dup_handler() function, all added and duplicated instances of the handler must be removed with ddi_intr_remove_handler() in order for the handler to be completely removed.  

RETURN VALUES

The ddi_intr_add_handler() and ddi_intr_remove_handler() functions return:

DDI_SUCCESS On success.

DDI_EINVAL On encountering invalid input parameters.

DDI_FAILURE On any implementation specific failure.

 

CONTEXT

The ddi_intr_add_handler() and ddi_intr_remove_handler() functions can be called from kernel non-interrupt context.  

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPEATTRIBUTE VALUE
Interface StabilityEvolving

 

SEE ALSO

attributes(5), attach(9E), detach(9E), ddi_intr_alloc(9F), ddi_intr_block_enable(9F), ddi_intr_disable(9F), ddi_intr_dup_handler(9F), ddi_intr_enable(9F), ddi_intr_free(9F), ddi_intr_get_supported_types(9F), mutex(9F), mutex_init(9F), rw_init(9F), rwlock(9F)

Writing Device Drivers  

NOTES

Consumers of these interfaces should verify that the return value is not equal to DDI_SUCCESS. Incomplete checking for failure codes could result in inconsistent behavior among platforms.

If a device driver that uses MSI and MSI-X interrupts resets the device, the device might reset its configuration space modifications. Such a reset could cause a device driver to lose any MSI and MSI-X interrupt usage settings that have been applied.

The second argument, arg2, is optional. Device drivers are free to use the two arguments however they see fit. There is no officially recommended model or restrictions. For example, an interrupt handler may wish to use the first argument as the pointer to its softstate and the second argument as the value of the MSI vector.


 

Index

NAME
SYNOPSIS
INTERFACE LEVEL
PARAMETERS
DESCRIPTION
RETURN VALUES
CONTEXT
ATTRIBUTES
SEE ALSO
NOTES

This document was created by man2html, using the manual pages.
Time: 02:39:39 GMT, October 02, 2010