Content-type: text/html Man page of lsimega

lsimega

Section: Devices (7D)
Updated: 20 April 2005
Index Return to Main Contents
 

NAME

lsimega - SCSI HBA driver for LSI MegaRAID 320-2x SCSI RAID Controller  

DESCRIPTION

The lsimega SCSI RAID host bus adapter driver is a SCSA-compliant nexus driver that supports LSI MegaRAID 320-2x SCSI RAID devices.

The lsimega driver supports standard functions provided by the SCSA interface, including RAID disk I/O and passthrough I/O to support SCSI tape and CDROM.  

DRIVER CONFIGURATION

The lsimega.conf file contains no user configurable parameters. Please configure your hardware through BIOS.

The LSI MegaRAID 320-2x device can support up to 40 logic drivers. Note that BIOS numbers the logic drives as 1 through 40, however in Solaris these drives are numbered from 0 to 39.  

ATTRIBUTES

See attributes(5) for a description of the following attributes:

ATTRIBUTE TYPEATTRIBUTE VALUE
Availabilityx86

 

FILES

/kernel/drv/lsimega

32-bit ELF kernel module.

/kernel/drv/amd64/lsimega

64-bit kernel module (x86 only).

/kernel/drv/lsimega.conf

Driver configuration file (contains no user-configurable options).

 

SEE ALSO

prtconf(1M), attributes(5), amr(7D), scsi_hba_attach(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S), scsi_device(9S), scsi_pkt(9S)

Small Computer System Interface-2 (SCSI-2)


 

Index

NAME
DESCRIPTION
DRIVER CONFIGURATION
ATTRIBUTES
FILES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 02:40:00 GMT, October 02, 2010