Content-type: text/html Man page of jfca

jfca

Section: Devices (7D)
Updated: 6 Nov 2003
Index Return to Main Contents
 

NAME

jfca - JNI Fibre Channel Adapter (FCA) Driver  

SYNOPSIS

SUNW,[email protected]
 

DESCRIPTION

The jfca host bus adapter driver is a Sun Fibre Channel transport layer-compliant nexus driver for the JNI FCX-6562-L and FCX2-6562-L adapters. These adapters support Fibre Channel SCSI and IP Protocols, FC-AL public loop profile, point-to-point, and fabric connection and Fibre Channel service classes two and three.

The jfca driver interfaces with the Sun Fibre Channel transport layer to support the standard functions provided by the SCSA interface. It supports auto request sense and tagged queueing by default. The driver requires that all devices have unique hard addresses in private loop configurations.  

FILES

/kernel/drv/sparcv9/jfca

64-bit ELF kernel module

/kernel/drv/jfca.conf

Configuration file

 

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPEATTRIBUTE VALUE
ArchitectureSPARC
AvailabilitySUNWjfca

 

SEE ALSO

prtconf(1M), driver.conf(4), fcp(7D), fp(7D)

Writing Device Drivers

ANSI X3.230:1994, Fibre Channel Physical Signaling (FC-PH)

Project 1134-D, Fibre Channel Generic Services (FC-GS-2)

ANSI X3.269-1996, Fibre Channel Arbitrated Loop (FC-AL)

ANSI X3.270-1996, Fibre Channel Protocol for SCSI (FCP-SCSI)

ANSI X3.270-1996, SCSI-3 Architecture Model (SAM)

Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)

Fabric Loop Attachment (FC-FLA)


 

Index

NAME
SYNOPSIS
DESCRIPTION
FILES
ATTRIBUTES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 02:39:59 GMT, October 02, 2010