Content-type: text/html Man page of rsm_memseg_import_putv

rsm_memseg_import_putv

Section: Remote Shared Memory Library Functions (3RSM)
Updated: 12 Nov 2001
Index Return to Main Contents
 

NAME

rsm_memseg_import_putv, rsm_memseg_import_getv - write to a segment using a list of I/O requests  

SYNOPSIS

cc [ flag... ] file... -lrsm [ library... ]
#include <rsmapi.h> 

int rsm_memseg_import_putv(rsm_scat_gath_t *sg_io);

int rsm_memseg_import_getv(rsm_scat_gath_t *sg_io);  

DESCRIPTION

The rsm_memseg_import_putv() and rsm_memseg_import_getv() functions provide for using a list of I/O requests rather than a single source and destination address as is done for thersm_memseg_import_put(3RSM) and rsm_memseg_import_get(3RSM) functions.

The I/O vector component of the scatter-gather list (sg_io), allows specifying local virtual addresses or local_memory_handles. When a local address range is used repeatedly, it is efficient to use a handle because allocated system resources (that is, locked down local memory) are maintained until the handle is freed. The supporting functions for handles are rsm_create_localmemory_handle(3RSM) and rsm_free_localmemory_handle(3RSM).

Virtual addresses or handles may be gathered into the vector for writing to a single remote segment, or a read from a single remote segment may be scattered to the vector of virtual addresses or handles.

Implicit mapping is supported for the scatter-gather type of access. The attributes of the extension library for the specific interconnect are used to determine whether mapping is necessary before any scatter-gather access. If mapping of the imported segment is a prerequisite for scatter-gather access and the mapping has not already been performed, an implicit mapping is performed for the imported segment. The I/O for the vector is then initiated.

I/O for the entire vector is initiated before returning. The barrier mode attribute of the import segment determines if the I/O has completed before the function returns. A barrier mode attribute setting of IMPLICIT guarantees that the transfer of data is completed in the order as entered in the I/O vector. An implicit barrier open and close surrounds each list entry. If an error is detected, I/O for the vector is terminated and the function returns immediately. The residual count indicates the number of entries for which the I/O either did not complete or was not initiated.

The number of entries in the I/O vector component of the scatter-gather list is specified in the io_request_count field of the rsm_scat_gath_t pointed to by sg_io. The io_request_count is valid if greater than 0 and less than or equal to RSM_MAX_SGIOREQS. If io_request_count is not in the valid range, rsm_memseg_import_putv() and rsm_memseg_import_getv() returns RSMERR_BAD_SGIO.

Optionally, the scatter-gather list allows support for an implicit signal post after the I/O for the entire vector has completed. This alleviates the need to do an explicit signal post after ever I/O transfer operation. The means of enabling the implicit signal post involves setting the flags field within the scatter-gather list to RSM_IMPLICIT_SIGPOST. The flags field may also be set to RSM_SIG_POST_NO_ACCUMULATE, which will be passed on to the signal post operation when RSM_IMPLICIT_SIGPOST is set.  

RETURN VALUES

Upon successful completion, these functions return 0. Otherwise, an error value is returned to indicate the error.  

ERRORS

The rsm_memseg_import_putv() and rsm_memseg_import_getv() functions can return the following errors:

RSMERR_BAD_SGIO Invalid scatter-gather structure pointer.

RSMERR_BAD_SEG_HNDL Invalid segment handle.

RSMERR_BAD_CTLR_HNDL Invalid controller handle.

RSMERR_BAD_OFFSET Invalid offset.

RSMERR_BAD_LENGTH Invalid length.

RSMERR_BAD_ADDR Bad address.

RSMERR_INSUFFICIENT_RESOURCES Insufficient resources.

RSMERR_INTERRUPTED The operation was interrupted by a signal.

RSMERR_PERM_DENIED Permission denied.

RSMERR_BARRIER_FAILURE I/O completion error.

RSMERR_REMOTE_NODE_UNREACHABLE Remote node not reachable.

 

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE ATTRIBUTE VALUE
Interface StabilityEvolving
MT-LevelMT-Safe

 

SEE ALSO

rsm_create_localmemory_handle(3RSM), rsm_free_localmemory_handle(3RSM), attributes(5)


 

Index

NAME
SYNOPSIS
DESCRIPTION
RETURN VALUES
ERRORS
ATTRIBUTES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 02:38:34 GMT, October 02, 2010