Content-type: text/html Man page of sccs-admin


Section: User Commands (1)
Updated: 30 Sep 2002
Index Return to Main Contents


sccs-admin, admin - create and administer SCCS history files  


/usr/ccs/bin/admin [-bhnz] [-a username | groupid]... 
    [-d flag] ... [-e username | groupid]... 
    [-f flag [value]] ... [-i [filename]] [-m mr-list] 
    [-rrelease] [-t [description-file]] [-y [comment]] s.filename...



The admin command creates or modifies the flags and other parameters of SCCS history files. Filenames of SCCS history files begin with the `s.' prefix, and are referred to as s.files, or ``history'' files.

The named s.file is created if it does not exist already. Its parameters are initialized or modified according to the options you specify. Parameters not specified are given default values when the file is initialized, otherwise they remain unchanged.

If a directory name is used in place of the s.filename argument, the admin command applies to all s.files in that directory. Unreadable s.files produce an error. The use of `-' as the s.filename argument indicates that the names of files are to be read from the standard input, one s.file per line.  


The following options are supported:

-a username | groupid

Adds a user name, or a numerical group ID, to the list of users who may check deltas in or out. If the list is empty, any user is allowed to do so.


Forces encoding of binary data. Files that contain ASCII NUL or other control characters, or that do not end with a NEWLINE, are recognized as binary data files. The contents of such files are stored in the history file in encoded form. See uuencode(1C) for details about the encoding. This option is normally used in conjunction with -i to force admin to encode initial versions not recognized as containing binary data.

-d flag

Deletes the indicated flag from the SCCS file. The -d option may be specified only for existing s.files. See -f for the list of recognized flags.

-e username | groupid

Erases a user name or group ID from the list of users allowed to make deltas.

-f flag [value]

Sets the indicated flag to the (optional) value specified. The following flags are recognized:


Enables branch deltas. When b is set, branches can be created using the -b option of the SCCS get command (see sccs-get(1)).


Sets a ceiling on the releases that can be checked out. ceil is a number less than or equal to 9999. If c is not set, the ceiling is 9999.


Specifies the default delta number, or SID, to be used by an SCCS get command.


Sets a floor on the releases that can be checked out. The floor is a number greater than 0 but less than 9999. If f is not set, the floor is 1.


Treats the `No id keywords (ge6)' message issued by an SCCS get or delta command as an error rather than a warning.


Allows concurrent updates.

l release[, release...]

Locks the indicated list of releases against deltas. If a is used, this flag locks out deltas to all releases. An SCCS `get -e' command fails when applied against a locked release.


Supplies a value for the module name to which the sccs-admin.1 keyword is to expand. If the m flag is not specified, the value assigned is the name of the SCCS file with the leading s. removed.


Creates empty releases when releases are skipped. These null (empty) deltas serve as anchor points for branch deltas.


Supplies a value to which the keyword is to expand when a read-only version is retrieved with the SCCS get command.


Specifies how many lines of code are scanned for the SCCS keyword.


Supplies a value for the module type to which the keyword is to expand.


Specifies a validation program for the MR numbers associated with a new delta. The optional program specifies the name of an MR number validity checking program. If this flag is set when creating an SCCS file, the -m option must also be used, in which case the list of MRs may be empty.


Specifies the SCCS keywords to be expanded. If no value is specified, no keywords will be expanded.


Checks the structure of an existing s.file (see sccsfile(4)), and compares a newly computed check-sum with one stored in the first line of that file. -h inhibits writing on the file and so nullifies the effect of any other options.


Initializes the history file with text from the indicated file. This text constitutes the initial delta, or set of checked-in changes. If filename is omitted, the initial text is obtained from the standard input. Omitting the -i option altogether creates an empty s.file. You can only initialize one s.file with text using -i. This option implies the -n option.

-m mr-list

Inserts the indicated Modification Request (MR) numbers into the commentary for the initial version. When specifying more than one MR number on the command line, mr-list takes the form of a quoted, space-separated list. A warning results if the v flag is not set or the MR validation fails.


Creates a new SCCS history file.


Specifies the release for the initial delta. -r may be used only in conjunction with -i. The initial delta is inserted into release 1 if this option is omitted. The level of the initial delta is always 1. Initial deltas are named 1.1 by default.


Inserts descriptive text from the file description-file. When -t is used in conjunction with -n, or -i to initialize a new s.file, the description-file must be supplied. When modifying the description for an existing file: a -t option without a description-file removes the descriptive text, if any; a -t option with a description-file replaces the existing text.


Inserts the indicated comment in the ``Comments:'' field for the initial delta. Valid only in conjunction with -i or -n. If -y option is omitted, a default comment line is inserted that notes the date and time the history file was created.


Recomputes the file check-sum and stores it in the first line of the s.file. Caution: It is important to verify the contents of the history file (see sccs-val(1), and the print subcommand in sccs(1)), since using -z on a truly corrupted file may prevent detection of the error.



Example 1 Preventing SCCS keyword expansion

In the following example, 10 lines of file will be scanned and only the W,Y,X keywords will be interpreted:

example% sccs admin -fs10 file
example% sccs admin -fyW,Y,X file
example% get file



See environ(5) for descriptions of the following environment variables that affect the execution of alias and unalias: LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, and NLSPATH.  


The following exit values are returned:


Successful completion.


An error occurred.




history file


history file in SCCS subdirectory


temporary lock file



See attributes(5) for descriptions of the following attributes:



Interface Stability




sccs(1), sccs-cdc(1), sccs-delta(1), sccs-get(1), sccs-help(1), sccs-rmdel(1), sccs-val(1), sccsfile(4), attributes(5), environ(5), standards(5)  


Use the SCCS help command for explanations (see sccs-help(1)).  


The last component of all SCCS filenames must have the `s.' prefix. New SCCS files are given mode 444 (see chmod(1)). All writing done by admin is to a temporary file with an x. prefix, created with mode 444 for a new SCCS file, or with the same mode as an existing SCCS file. After successful execution of admin, the existing s.file is removed and replaced with the x.file. This ensures that changes are made to the SCCS file only when no errors have occurred.

It is recommended that directories containing SCCS files have permission mode 755, and that the s.files themselves have mode 444. The mode for directories allows only the owner to modify the SCCS files contained in the directories, while the mode of the s.files prevents all modifications except those performed using SCCS commands.

If it should be necessary to patch an SCCS file for any reason, the mode may be changed to 644 by the owner to allow use of a text editor. However, extreme care must be taken when doing this. The edited file should always be processed by an `admin -h' command to check for corruption, followed by an `admin -z' command to generate a proper check-sum. Another `admin -h' command is recommended to ensure that the resulting s.file is valid.

admin also uses a temporary lock s.file, starting with the `z.' prefix, to prevent simultaneous updates to the s.file. See sccs-get(1) for further information about the `z.file'.




This document was created by man2html, using the manual pages.
Time: 02:39:21 GMT, October 02, 2010