Content-type: text/html Man page of mixerctl

mixerctl

Section: User Commands (1)
Updated: 12 Mar 2001
Index Return to Main Contents
 

NAME

mixerctl - audio mixer control command line application  

SYNOPSIS

/usr/sbin/mixerctl [-a | -d dev] [-iv] [-e | -o]  

DESCRIPTION

Some audio devices support the audio mixer functionality. See mixer(7I) for a complete description of the audio mixer. The mixerctl command is used to control the mode of the audio mixer and to get information about the audio mixer and the audio device. See audio(7I) for details.  

OPTIONS

The following options are supported. If none are specified, option -i is assumed:

-a The command applies to all audio devices.

-d dev The dev argument specifies an alternate audio control device for the command to use.

-e Enables the audio mixer function if the audio device supports it. If supported, the audio mixer may be enabled at any time. The command silently ignores the enable option if the audio mixer is already enabled.

-i Prints the audio device type information for the device and indicates whether the audio device uses the audio mixer. If the device does use the audio mixer, this option displays the audio mixer's mode.

-o Turns off the audio mixer function if the audio device supports it. If supported, the audio mixer may be turned off if only one process has the device opened with the O_RDWR flag, or, if two different processes have the device opened, one with the O_RDONLY flag and the other with the O_WRONLY flag. (See open(2).) The command silently ignores the disable option if the audio mixer function is already disabled.

-v Verbose mode. Prints the audio_info_t structure for the device, along with the device type information. This option implies the -i option.

 

ENVIRONMENT VARIABLES

AUDIODEV If the -d and -a options are not specified, the AUDIODEV environment variable is consulted. If set, AUDIODEV will contain the full path name of the user's default audio device. The default audio device will be converted into a control device, and then used. If the AUDIODEV variable is not set, /dev/audioctl is used.

 

FILES

/dev/audioctl

/dev/sound/{0...n}ctl  

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPEATTRIBUTE VALUE
ArchitectureSPARC, x86
AvailabilitySUNWauda
Stability LevelEvolving

 

SEE ALSO

audioconvert(1), audioplay(1), audiorecord(1), open(2), attributes(5), usb_ac(7D), audio(7I), audio_support(7I), mixer(7I)


 

Index

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
ENVIRONMENT VARIABLES
FILES
ATTRIBUTES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 02:39:24 GMT, October 02, 2010